Gas Fireplace Repair Experts · Henderson County

Gas Fireplace Repair in Brownsboro, TX

1Chimney & Air Duct Cleaning repairs gas fireplaces in Brownsboro from our office in Tool, TX, about 33 miles away. Diagnosis and repair of gas fireplaces that will not light, will not stay lit, or shut off on their own. Rated 4.8★ across 153 verified customer reviews.

Brownsboro is served on our Athens and Chandler routes along Highway 31.

Gas Fireplace problems we fix in Brownsboro

Gas fireplace will not light
Pilot light will not stay lit
Fireplace lights then shuts off after a few minutes
Pilot is lit but the burner will not ignite
Clicking or sparking but no flame
Fireplace will not turn on from the wall switch or remote
Weak, yellow or sooty flames
Gas smell around the fireplace

What the visit includes

Pilot assembly replacement
Thermocouple and thermopile service and replacement
Gas valve repair and replacement
Ignition module, spark igniter and wall switch repair
Remote control and receiver replacement
Burner and log set cleaning and repositioning
Gas leak checks and safety testing

Gas fireplace repair is our specialty. We diagnose and repair vented and vent-free gas fireplaces, inserts and gas log sets, including pilot assemblies, thermocouples and thermopiles, gas valves, ignition modules, remote receivers and burner systems. Most repairs are completed in a single visit with parts we carry on the truck.

Call +19729012237 About our gas Fireplace Repair →

What customers say about 1Chimney & Air Duct Cleaning

August 29, 2026

Jill Austin

Very knowledgeable. Enjoyed talking with him and his helper (son). Was not pushy for repairs he suggested or upgrades.

August 20, 2026

Brian G

We recently purchased a home and had about a million things we needed to attend to including having the dryer vent and chimney cleaned and get advice on what stuff needed to be repaired. We selected 1Chimney & Air based solely on reviews. We really lucked out. Boyd and his helper not only cleaned out the dryer run but also went into the crawlspace to inspect the dryer vent to make sure it was thoroughly clean they also examined the external vent and explained that we were seeing lint buildup because the flap was stuck open causing the lint to interact with the humid air. Similar examples on the fireplace and chimney cleaning, inspection and suggested repairs. They showed me the parts that needed attention, explained what i was looking at and when appropriate gave a range of solutions with differing costs. Boyd explained the pluses and minuses of each one. The cost for the services were very reasonable and Boyd’s expertise was invaluable.

August 6, 2026

H Daniel

1Chimney did a great job repairing the hearth. Very professional & friendly. I would recommend them for your job.

Gas Fireplace Repair in Brownsboro: questions

Do you offer gas Fireplace Repair in Brownsboro, TX?

Yes. 1Chimney & Air Duct Cleaning provides gas Fireplace Repair throughout Brownsboro and the rest of Henderson County from our office in Tool, about 33 miles away. Call +19729012237 to schedule.

Why will my gas fireplace not light?

The most common causes are a failed thermocouple or thermopile, a dirty or clogged pilot assembly, a stuck gas valve, or a wall switch or remote receiver that has stopped sending the signal. We test each of these on site and carry the common replacement parts on the truck.

Why will the pilot light not stay lit?

A pilot that lights but goes out when you release the knob almost always means the thermocouple is not producing enough millivolts to hold the valve open. The fix is usually cleaning the pilot assembly or replacing the thermocouple, both same-visit repairs.

Do you repair all brands of gas fireplaces?

Yes. We service Heat & Glo, Heatilator, Majestic, Napoleon, Superior, Lennox, Monessen, Empire, FMI, Desa and most other vented and vent-free gas fireplaces, inserts and log sets.